Petrorays brings High quality Cast Nylon rods Round & square profile. CAST NYLON is far superior to extruded Nylon-6.
Cast Nylon is made bydirectpolymerization of caprolactam, this polymer is never been melted and thus it is not subjected to any thermal degradation. We are manufacturers, suppliers, and exporters of cast nylon rods and sheets in Mumbai, India to all over the world.
In addition, its molecularweight is several folds higher than molecular weight of Extruded Nylon-6.
With Increase in molecular weight the physical properties of Thermoplastics improves Cast Nylon has superior tensile & compressive strength, modulus of elasticity, better wear & tear resistance, Lowerdistortion even at Higher temperatures, Low moisture absorption, superior dimensional stability
PROPERTIES OF CAST NYLON :
PROPERTIES | CONDITION | TEST METHOD | UNIT | VALUES |
Specific Gravity | - | ASTM D792 | g/cm3 | 1.14 - 1.16 |
Water absorption @20oC | - | ASTM D 570 | % | 0.3 to 3 |
MECHANICAL PROPERTIES :
PROPERTIES | CONDITION | TEST METHOD | UNIT | VALUES |
Tensile Strength at yield | - | ASTM D638 | Kg/cm2 | 750 - 850 |
Compression strength at yield | - | - | Kg/cm3 | 940 |
Elongation at yield | - | ASTM D638 | % | 12 - 13 |
Durometer (23oC) | - | - | D | D 82 - 89 |
E - Modulus | - | ASTM D638 | Kg/cm3 | 24000 to 26300 |
Temperature of Deflection | - | - | oC | 80 |
Flexural Strength | - | ASTM D | Kg/cm2 | 1000 - 1350 |
Notched Impact Strength | - | ASTM D | cm - Kg / cm2 | 5-11 |
Hardness Rockwell (23oC) | - | - | - | R 107 - 112 |
Resistance to heat (Continuous) | In Air In water In Oil |
- | - | 80o 100o 140o |
Impact strength at (20oC) | - | - | Kg cm / cm | 10 |
Melting Point | - | ASTM D569 | oC | 215 |
Effect of weak acids | - | - | - | Resistance |
Effect of strong acids | - | - | - | Attacked |
Effect of weak alkalies | - | - | - | None |
Effect strong alkalies | - | - | - | None |
Effect of Organic Solvents | - | - | - | Resistant to common solvents |